AntonSL Blog

Code Rahasia Untuk HP Anda

2008-09-23T14:15:00.001+07:00

Untuk teman - teman yang ingin mengetahui code pada HP anda, bisa anda lihat di bawah ini :

NOKIA

*3370#
Activate Enhanced Full Rate Codec (EFR) - Your phone uses the best sound quality but talk time is reduced my approx. 5%

#3370#
Deactivate Enhanced Full Rate Codec (EFR)

*#4720#
Activate Half Rate Codec - Your phone uses a lower quality sound but you should gain approx 30% more Talk Time

*#4720#
Deactivate Half Rate Codec

*#0000#
Displays your phones software version, 1st Line : Software Version, 2nd Line : Software Release Date, 3rd Line : Compression Type

*#9999#
Phones software version if *#0000# does not work

*#06#
For checking the International Mobile Equipment Identity (IMEI Number)

#pw+1234567890+1#
Provider Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols)

#pw+1234567890+2#
Network Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols)

#pw+1234567890+3#
Country Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols)

#pw+1234567890+4#
SIM Card Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols)

*#147#
(vodafone) this lets you know who called you last

*#1471#
Last call (Only vodofone)

*#21#
Allows you to check the number that "All Calls" are diverted to

*#2640#
Displays security code in use

*#30#
Lets you see the private number

*#43#
Allows you to check the "Call Waiting" status of your phone.

*#61#
Allows you to check the number that "On No Reply" calls are diverted to

*#62#
Allows you to check the number that "Divert If Unreachable (no service)" calls are diverted to

*#67#
Allows you to check the number that "On Busy Calls" are diverted to

*#67705646#
Removes operator logo on 3310 & 3330

*#73#
Reset phone timers and game scores

*#746025625#
Displays the SIM Clock status, if your phone supports this power saving feature "SIM Clock Stop Allowed", it means you will get the best standby time possible

*#7760#
Manufactures code

*#7780#
Restore factory settings

*#8110#
Software version for the nokia 8110

*#92702689#
Displays - 1.Serial Number, 2.Date Made, 3.Purchase Date, 4.Date of last repair (0000 for no repairs), 5.Transfer User Data. To exit this mode you need to switch your phone off then on again

*#94870345123456789#
Deactivate the PWM-Mem

**21*number#
Turn on "All Calls" diverting to the phone number entered

**61*number#
Turn on "No Reply" diverting to the phone number entered

**67*number#
Turn on "On Busy" diverting to the phone number entered

12345
This is the default security code

press and hold #
Lets you switch between lines

MOTOROLA

*#06#
For checking the International Mobile Equipment Identity (IMEI Number)

[][][] 119 [] 1 []
Activate Enhanced Full Rate Codec (EFR) - Your phone uses the best sound quality but talk time is reduced my approx. 5%

[][][] 119 [] 0 []
Deactivate Enhanced Full Rate Codec (EFR)

SONY ERICSSON

*#06#
For checking the International Mobile Equipment Identity (IMEI Number)

*#0000#
Reset language back to English

> * < < * < *
Service Menu - tells you the phone's software version (good for checking your phone's "age" before buying it) Press "Yes" repeatedly to see all the software data & press ">" to see all the texts available in your phone

< * * <
SIM lock - Do not lock your phone if you don't know the unlock code. This is another good check before you buy any phone, especially second hand ones. If phone is SIM locked, you may not be able to switch to other GSM operators

Shortcuts
Save a Missed Call into your phone directory
-Scroll to "Missed Call", press "Yes" to display the required number. Press any number (i.e. 0 to 9), then press "clear" once to clear that number, then press & hold "<" until you see "Store". Press "Yes"

Hide your number when calling when you don't want the other party to know your number)
-After dialling the required number & before pressing "Yes", press ">" twice to choose "Hide Id?" & then press "Yes". Also works for pre-programmed & last dialled numbers just press "No" & wait for the number to appear on the screen first then follow same procedure

Check you battery level when phone is off
Press "No" quickly one time & wait for the battery meter to show up!
Save a number into your phone memory (not SIM card)
-Follow normal procedures to store a phone number. When prompted to set a storage position, press "#" once & key in desired location, or press "#" twice for next available position

Call a phone number from SMS message
-You can call from within a SMS message if the phone number is written in it. Just scroll the message until the phone number appears on the display, then press "Yes" to call

SAMSUNG

*#06#
Shows IMEI number

*#9999#
Show software version

*#0001#
Display RS232 serial communication parameter setup

*#8999*228#
Display battery capacity and temperature / voltage

*#8999*523#
Adjust display contrast

*#8999*636#
Display storage capacity

*#8999*778#
Display SIM card information

*#8999*324#
The network checkout (engineering model)

*#8999*289#
Ringtone test

*#8999*364#
Display Watchdog state

*#8999*427#
WATCHDOG signal route setup

*#8999*842#
Vibrate test

*#8999*782#
Show date and alarm clock

*#8999*246#
Show the memory capacity

*#8999*786#
The display during warning

*#8999*837#
Samsung hardware version

*#8999*377#
Software error LOG (wrong display of EEPROM)

*#8999*638#
Show network information

*#8999*9266#
Display received channel number and received intensity

SIEMENS

*#0003*
(secret code 8 digits)#

Siemens S25/C25

SP unlock *#0003*
(secret code 8 digits)#

* # 06 #
Show IMEI code

Resets language to automatic selection : * # 0000 # then Green button

Pin Out Data Cable schematics
Phone's connector pin-out:
1- GND
2- SB
3- POWER
4- NC
5- TX
6- RX
7- CLOCK
8- DATA
9- GND MIC
10- HF MIC
11- AUDIO
12- GND AUDIO

Siemens S1/S3/S3 Com

To view the software date and else with S3 com, S4, S4Power, Sony cmdx 1000e press with SIM removed *#06# and left softkey.
To view some other stuff with S4Power, Sony cmdx 1000e press with SIM removed *#06# and left softkey twice.
To view the software date with S3 com, S4, S4Power, Sony cmdx 1000e press with SIM installed menu 98 and left softkey twice.

ACTIVATE MONITOR MODE

Siemens S1/S3

Menu, 9 (Phone Options), 7 (Phone Status), Left Display Button (left MENU key), 5553756, Hang-Up Button (Red Handset key)

Siemens S3 COM/S4

Menu, 9 (Phone Options), 7 (Phone Status - 8 on Some), Left Display Button (left MENU key), 7684666, Hang-Up Button (Red Handset key)

Note: Now Monitor should appear at the bottom of the Network Options menu.

MONITOR MODE

Pressing the right Display Button when in monitor mode will toggle into 1 and 2 modes

Pressing the right Display Button when in monitor mode will show a list of the six cells with the strongest signals.

Test Mode Indicators: (* = only available when call in progress )
CH Channel Number

RX Signal Strength (dB)

N NCC (Colour Code)

B BCC (Colour Code)

CI Cell ID (in Hex)

C1+ How long before phone does forced hand over. (see RX and RXAM)

LAI Location Area Identity. Display Network ID code (42F010 = 240.01) and MSC

TXPWR Transmit Power (dB)

RXAM Receive signal strength cut-off point

TS* Time Slot Number

TA* Timing Advance. Distance from tower in Km X 2

PL* Power Level

POWER table

PL: 5 6 7 8 9 10 11 12 13 14 15

dB: 33 31 29 27 25 23 21 19 17 15 13

Watts: 2 1.3 .8 .5 .3 .2 .13 .08 .05 .03 .02

LF* C1 value with continuous transmission from tower

LS* C1 Value with discontinuous transmission from tower

QF* Bit Error Rate with continuous transmission from tower

QS* Bit Error Rate with discontinuous transmission from tower

BER (bit error rate) table
QF/QS register: 0 1 2 3 4 5 6 7

% of bit sent: 0.2 0.8 0.4 1.6 3.2 6.4 12.8 25.6

Siemens S1/S3

Here's a trick to play Tetris, also known as Klotz on a Siemens S1.
Turn the phone on. Enter PIN. Before the telephone has logged in to the your GSM net do the following steps.
1: Choose F 9 (function settings)
2: Choose send own number and push the right button for choose.
3: Push 9
USE 2 as < and 8 as > , rotate the klotz with 5 and drop with 4.
[I have just heard from one of the programmers of the phone that Tetris was in the phone during development, but it was removed before it was produced. Apparently someone has the patent on games in mobile phones and Siemens didn't want to pay the licensing fees. It was either in Menu F-9-9 or it's not there at all.]

Siemens S3 Comfort

MONITOR MODE

The Siemens S3 Com series have a Monitor mode that can be activated directly from the standard user keypad. In order to activate this mode, you must enter the special access code currently programmed into the phone.

TO ACTIVATE MONITOR MODE:

Turn the phone on.
Enter the PIN access code on press OK. (Only if is enabled).
Press Menu. (Left top button).
Press 9. (Phone Options).
Press 8. (Phone Status) (May be button 7 in some phones).
You may see your IMEI Number
Left Display Button (Top left MENU key).
7684666
Hang-Up Button. (Red Handset key).

Note: Monitor should appear now at the bottom of the Network Options menu.

MONITOR MODE

Pressing the right Display Button when in monitor mode will toggle into 1 and 2 modes

Siemens S4/S4 Power

In phonebook under "Own Phone No." enter +12022243121 (which is the number to the White House) and you'll get a greeting from the people who programmed the phone.

MONITOR MODE

The Siemens S4 series have a Monitor mode that can be activated directly from the standard user keypad. In order to activate this mode, you must enter the special access code currently programmed into the phone.

TO ACTIVATE MONITOR MODE:

Menu, 9 (Phone Options), 7 (Phone Status), Left Display Button (left MENU key), 7684666, Hang-Up Button (Red Handset key)
Now "Monitor" should appear at the bottom of the Network Options menu.
Pressing the right Display Button when in monitor mode will show a list of the six cells with the strongest signals.

Test Mode Indicators: (* = only available when call in progress )

CH Channel Number

RX Signal Strength (dB)
N NCC (Color Code)
B BCC (Color Code)
CI Cell ID (in Hex)
C1+ how long before phone does forced hand over. (see RX and RXAM)
LAI Location Area Identity. Display Network ID code (42F010 = 240.01) and MSC
TXPWR Transmit Power (dB)
RXAM Reeceive signal strength cut-off point
TS* Time Slot Number
TA* Timing Advance. Distance from tower in Km X 2
PL* Power Level

Power Table

PL: 5 6 7 8 9 10 11 12 13 14 15

dB: 33 31 29 27 25 23 21 19 17 15 13

Semoga bermanfaat. Uhui...

Aplikasi Chatting ( Jabber Client ) Untuk PC Anda

2008-09-20T19:17:00.003+07:00

Untuk kawan - kawan yang ingin mencoba Chating via PC dan terkoneksi ke Jabber ( Jabber Client ) , ada banyak Aplikasi - aplikasi yang bisa anda coba. Selain mendukung Operating System ( OS ) Windows, aplikasi - aplikasi tersebut mendukung Linux, MacOS, dan beberapa Operating System lain. Ada juga yang mendukung Windows Mobile. Aplikasi - aplikasi tersebut di antaranya :

- Miranda : Mendukung OS Windows ( 95/98/ Me/NT/2000/XP/Vista )

- Gajim : Mendukung OS Windows ( XP/Vista ) , Linux, FreeBSD.

- Tkabber : Mendukung OS Windows ( 98/2000/XP ) , Linux, FreeBSD, NetBSD, Solaris, MacOS X.

- JAJC : Mendukung OS Windows ( 98/XP )

Nah itu sebagian Aplikasi - aplikasi Chating yang bisa anda coba, tampilan dah fiturnya lengkap banget, silahkan anda coba.

Untuk melihat smua aplikasi - aplikasi Jabber Client yang lain, anda dapat melihatnya di : All Jabber Clients

Jabber Never Dies!!! Go...go...go... Jabber *DANCE* Uhui....

Cara Masuk / Join Room di Bombus

2008-09-20T04:49:00.011+07:00

Seperti yang telah saya sampaikan sebelumnya, Bombus mempunyai Room / Conference yang bisa kita masuki untuk berinteraksi dengan para chaters / jabber mania hehe...

Saya akan membahas bagaimana cara untuk masuk Room di Bombus, untuk memudahkan kita memasuki Room tesebut setelah kita Add sebaiknya kita save atau simpan, sehingga kita dapat dengan mudah memasuki Room tersebut kapan saja waktu anda login Bombus. Caranya sebagai berikut :

Contoh Room yang akan kita masuki adalah Indochat, Room tempat para user dari Indonesia berkumpul.

Pilih Options -> Conference -> Options -> New Conference Kemudian :
1) Room : indochat
2) at host : conference.jabber.ru
3) Nickname : nick / nama kecil
4) Description : Indochat
Kemudian pilih Options -> Add Bookmark.

Setelah kita Add Room Indochat tersebut, bila kita ingin masuk kedalamnya kita pilih Options -> Conference -> Indochat -> tekan angka 5. Masuk dech kita ke Room Indochat hehe...

Nah... yang punya Room Indochat ini namanya Mas Barep, kalau ada kesulitan mengenai pemakaian bombus... Anda bisa minta bantuan dia, orangnya baek kok hehe...

Alamat Room - Room yg biasa para chater Indonesia yang lain :

- indonesia@conference.jabber.org
- indonesia@conference.jabber.ru
- indoroom@conference.jabber.ru

Cara Add atau join di Room tersebut sama seperti Indochat tadi, ganti nama Room, nah... Untuk Room yang bukan di jabber.ru anda tinggal ganti at host : conference.jabber.org, mudah kan? Hehe..

Selamat berchating ria uhui...

Cara Setting IM ( Instant Messaging ) pada Bombus

2008-09-19T23:17:00.005+07:00

Untuk menyetting IM ( Instant Messaging ) anda pada Bombus / Bombusmod, caranya :

Pilih options -> tools -> service discovery -> options -> server -> address. Isi dengan iptel.org / draugr.de / geeklife.ru ( untuk anda yang meregistrasikan Akun di jabbus.org, address di isi jabbus.org ) pilih IM anda yg mau anda registrasi di Bombus

Contoh : MSN

Pilih MSN -> register -> Username : Hotmail anda -> password : Password Hotmail -> send, setelah berhasil akan muncul Transport MSN di Bombus anda.

Untuk YM,AIM,ICQ dll, caranya sama seperti di atas, tapi untuk Gtalk ( Google Talk ) ada sedikit perbedaan.

Server untuk Gtalk : jrudevels.org /udaff.com

Contoh : Gtalk

Pilih options -> tools -> service discovery -> options -> server -> address, isi jrudevels.org / udaff.com
setelah masuk pilih Gtalk / G2j -> register -> Username : gmail anda ( tidak pakai @ ) -> password : Password Gmail anda -> Sever : gmail.com -> Domain or IP : talk.google.com -> Send

Selamat mencoba. Uhui..

Cara Registrasi Akun di Bombus

2008-09-19T21:20:00.002+07:00

Setelah anda download dan install aplikasi Bombus/Bombusmod, anda buka aplikasi tersebut, dan ikuti instruksi dibawah ini :

1. Pilih new acount
2. Username : di isi dengan nama yg anda inginkan
3. Pasrword : password anda
4. Server : *jabber.ru
5. Hostname/IP : *di kosongkan
6. Port : 5222
7. Tandai Register Account
8. Kemudian klik ok
9. Tunggu sampai ada tulisan Success
10. Setelah Acount anda berhasil di buat kemudian tekan "connect"

*) Server - server lain yg bisa digunakan untuk membuat Akun di Bombus : jabber.org, jabbus.org, xmpp.ru

*) Hostname/IP gunanya untuk mempercepat proses login pada bombus, jika anda kosongkan tidak ada masalah.

- jabber.ru : 213.180.203.18
- xmpp.ru : 213.180.203.19
- jabbus.org : 217.147.29.117

selamat berchating ria uhui...

Cara setting IMAP dan POP3 e-mail HP

2008-09-18T17:55:00.005+07:00

Untuk teman - teman yang menbutuhkan settingan e-mail IMAP dan POP3 pada HP anda, semoga bermanfaat. Uhui..

AOL
Email Address : user@aol.com
Mail Server Type : IMAP
Incoming : imap.aol.com Port 143
Outgoing : smtp.aol.com Port 587
User Name : user [@ not needed ]
Password : email password
*no SSL for IMAP and SMTP.
*not needed activated your POP3 / IMAP on mail setting on web

GMAIL
Email Address : user@gmail.com
Mail Server Type : IMAP
Incoming : imap.gmail.com, port 993
Outgoing : smtp.gmail.com, port 465
User Name : user@gmail.com
Password : email pasword
*use SSL for IMAP and SMTP.
*needed activated your POP3 / IMAP on mail setting on web.

CORTADO
Email Address : user@cortado.com
Mail Server Type : IMAP
Incoming : imap.cortado.com
Outgoing : smtp.cortado.com
User Name : user@cortado.com
Password : email pasword
*no SSL for imap and smtp.
*not needed activated your POP3 / IMAP on mail setting on web.

Y! .com
Email Address : user@yahoo.com
Mail Server Type : IMAP
Incoming : imap.next.mail.yahoo.com, port 143
Outgoing : smtp.mobile.mail.yahoo.com, port 25
User Name : user [@ not needed ]
Password : email pasword
*no SSL for IMAP and SMTP.
*not needed activated your POP3 / IMAP on mail setting on web.

Y! .co.id
Email Address : user@yahoo.co.id
Mail Server Type : POP3
Incoming : pop.mail.yahoo.co.id, port 995
Outgoing : smtp.mail.yahoo.co.id, port 465
User Name : user [@ not needed ]
Pasword : email pasword
*use SSL for IMAP and SMTP.
*need activated your Pop3 / IMAP on mail setting on web.

Mail.ru
Email Address : user@mail.ru
Mail Server Type : POP3
Incoming : pop.mail.ru, port 110
Outgoing : smtp.mail.ru, port 25
User name : user [@ not needed ]
Password : email pasword
*no SSL for IMAP and SMTP.
*need activated your Pop3 / IMAP on mail setting on web.

Bombus ( Aplikasi chating yang maknyus buat HP )

2008-09-18T17:13:00.015+07:00

Mungkin anda semua tidak asing lagi dengan chating,hampir semua orang suka dengan yang namanya chating, betul tidak? hehe.. Kali ini saya ingin memperkenalkan salah satu aplikasi chating yang menurut saya ajib bin maknyus.. hehe.. apakah itu?? Namanya adalah BOMBUS. Aplikasi ini asli dari rusia,tapi.. tersedia dalam berbagai bahasa,termasuk Indonesia. Mantab kan? Apakah saja kehebatan Bombus ini?..

Buanyak banget dech.. klo di tulis semua bisa 2 buku hehe..

Di antaranya :

- Kompresi Data ( Chat jadi lebih Irit )

- Mendukung hampir semua IM ( YM, Gtalk, MSN, AIM, ICQ, dll )

- Smiley Buanyak, tinggal pilih hehe..

- Ada Room juga loh.

- Build Online ( kita bisa membuat bombus apa yang kita mau )

- Yang lebih penting lagi... aplikasi ini GRATIS hehe..

Nah itu deh sedikit keunggulan Bombus. Bombus ini ada dua macam jenisnya, Bombus dan BombusMod. Bombusmod lebih banyak Fiturenya daripada Bombus, tergantung deh mana yang kamu mau.

Screenshoots

Jika anda berminat mencobanya, anda dapat mendownloadnya di :

Bombus
Bombusmod

Selamat Mencoba.. uhui..

Halo...

2008-09-17T21:12:00.000+07:00

Selamat datang di blog sederhanaku, masih dalam pembuatan, mohon saran dan kritik anda, terima kasih.